When turning on the machine for the first time, ensure that the steering motor turns correctly, and check whether there is any leakage in the pipe joints of the motor. . Every time you start every time you start, you need to start.

Regularly check the lubricating oil level, if the oil level is lower than the lower limit, add lubricating oil in time. The oil must be changed after the first 300 hours of operation, and then every 1500 hours of operation. The oil suction filter element must be replaced every 600 hours of operation. The filter element model: TF-25×180.

When working, the material falls vertically on the upper surface of the shelf plate from the feed inlet, and the material is continuously and evenly distributed on the surface of the inner cavity of the mold (the contact surface between the pressing plate and the mold) through the rotation of the shelf plate. The material passes through the holes of the mold (through holes evenly distributed on the inner surface of the mold). In this process, the material is subjected to high pressure and high temperature, resulting in physical changes or appropriate chemical changes (according to the material), prompting the powdery material to form a continuously elongated cylindrical solid body, which continues to elongate until it is evenly distributed around the mold The cutting knife cuts to form granules of certain specifications; the granules scattered around the mold are concentrated to the discharge port by the shifting teeth (the product structure diagram), and the granules fall automatically under the action of gravity, and the pressing process of the granules is completed.