Double shaft shredder:

Raw materials can be waste cloth, palm fiber, straw bales, wooden pallets with nails and rubber etc.

Straw rotary cutter:

1. Mainly for dry materials.

2. Broken and crushed as one.

3. The feed opening is wide.The maximum feed opening diameter is 3m.

4. Raw materials with a moisture content lower than 45% can be crushed directly. If the moisture content of the raw material is higher than 45%, it needs to be roughly broken first, then dried and then finely powdered.

Wood chipper:

1.1400-600 model, 160kw, capacity is 15-20t/h.

2.The output belt is 10m.

Hammer mill:

1. The wearing parts are screen and hammer.

2. The material of the hammer is alloy steel + wear-resistant material.

3. Hammer life is about 500-800 working hours.

Vertical ring die wood pellet machine(90/110/132/160/220/250kw):

1.Vertical ring die pellet machine are integrated industrial reducers.(The reducer is guaranteed for three years.)

2. The feeding hopper, out-feeding hopper, Granulation room, dust removal hopper, and moulds are all made of 201 industrial stainless steel. The material of the roller shell is 65 manganese steel.Wear-resistant, heat-resistant and corrosion-resistant.

3. All spare parts are national standards.

4. National standard pure copper motor.(The motor is guaranteed for 18 months.)

5. Electrical components are Delixi and CHNT brands.

6. Equipped with an automatic oil pump, it will automatically oil once every 20 minutes.

7. Equipped with an oil cooling system to cool the gear oil in the gearbox.

8. The life of the mould material is alloy steel is about 500-600 working hours. The life of the mould material is stainless steel is about 800-1000 working hours.

9. The electric control cabinet is a PLC touch screen, a 15-inch touch screen panel, a fully automatic control system, and one-button start and stop.

10.The touch screen of the electric control cabinet can be connected to the wifi signal, and the mobile phone can be controlled at any time.